Kolb Machines
KOLB KE-MULTI Bridge Saw Machine
Cutting length: 3500 mm
Travel of cutting support: 3700 mm
Side travel of bridge: 3500 mm
Cutting depth: up to 200mm
For cutting disc diameters: 400-600 mm (bore 60 mm) inch)
Drive motor: 11KW/240V/60Hz/1800 rpm (U.S.)
Height adjustment of cutting disc: 350 mm
Turn table DT-3300/1
Dimensions: 3300x1800 mm
Diameter of slewing rim: 950 mm
Max. load: up to 8 tons
Height of table: 820 mm
Total weight: 4800 kg
Required floorspace: 5400x4600x2700 mm
•Infinitely adjustable cutting advance
•High speed transverse and rapid return of cutting blade
•Motorized height adjustment of cutting blade
•Simple operation: virtually maintenance free
•8-fold guide way system for precise cutting results
•Sturdy turn table with precision slewing ring and mechanic brake with rapid
engagement at 0 degrees and 90 degrees, clamping In any position desired
•Special rust protection primer/ guards and sheetings made of stainless steel
•15 HP Motor (11 kW)
•Erection on concrete or steel foundations
More Details 
KOLB BLUESTAR Bridge Saw Machine
Cutting length: 3500 mm (11,5 ft)
Travel of cutting support: 3700 mm (12 ft)
Side travel of bridge: 3500 mm (11,5 ft)
Cutting depth: up to 100 mm (150)
For cutting disc diameters: 400 mm (500) (16 or 20 inch)
Drive motor: 7,5 KW/(10hp)240V/60Hz/1800 rpm
Height adjustment of cutting disc 250 mm
Turn table DT-3300 VZ
Dimensions: 3300x1800 mm (11 x 6 ft)
Diameter of slewing rim: 950 mm
Max. load: up to 8 tons
Height of table: 820 mm
Total weight: 4800 kg
Required floorspace: 5400x4600x2700 mm (18x15x9 ft)
Colour RAL 5015/2004 blue/orange
Standard equipment:
Motorised bridge travel with two speeds, digital readout and up to 99 programmable cutting sequences.
Thickness of cutting disc is automatically considered. (Accuracy +/- 0,25mm)
45° tilting head, by means of a hand lever with digital displaystep cutting
automatic travel of bridge to zero and initial position
strong laser to indicate cutting line
automatic switch-off of machine after automatic operation
Protective cover and splash guards made of stainless steel
Table top completely milled covered with a water resistant table board that is covered with wood (upon request without wood)
Locking of turntable possible in any desired position (mechanic brake) engagement at 0°, 45° and 90°
Loading frame for table – you just put the slab into the frame and tilt it to horizontal position (quiet easy!) – this frame is also completely hot galvanized.
KOLB MULTISTAR Bridge Saw Machine
Standard equipment:
Motorised bridge travel at two speeds, digital readout and up to 99 programmable cutting sequences. Thickness of cutting disc is automatically considered. (Accuracy +/- 0,25mm)
Operation modes: Manual, Automatic return, Automatic lifting of the blade, Step cutting, Last cut backward
Automatic switch off of machine when machine has finished work (Switch off of power and water supply)
0°- 45° infinitely tilting of blade with digital display, adjustment
by means of gear motor, enables you to step cut with tilted head
Laser as cutting indication, ready mounted
Swivelling operation box with a turning control panel
Working hour
Protective cover and splash guards made of stainless steel
Automatic travel of bridge to zero position
Support guide rails are covered with expansion bellows for dust protection
Turntable is equipped with a hydraulic brake, operated by a switch
Table top is completely milled, and covered with a water resistant table board that is covered with wood
rapid locks at 0°, 45° and 90°
central lubrication system by means of a lever
Length of cut: 3500 mm
Support travel: 3700 mm
Side travel of bridge: 3500 mm
Depth of cut: up to 230mm
Diameter of blade: 400-700 mm (bore 60 mm)
Drive motor: 11KW/400V/1450 rpm
Raise and fall of blade: 500 mm
Turn table DT-3300/2
Dimensions of table top: 3300 x 1800 mm
Diameter of slewing rim: 950 mm
Load up to 8000 kg
Height of table: 820 mm
Total weight of machine: appr. 4.5 tons
Required floorspace: 5500x4700x3200 mm (can be changed)
Colour: RAL 5015/2004 Blue/Orange
KOLB KBL Edge Polish Machine
Shifting motor shaft with internal and external cooling of tools
Pressure controller for each motor
Precise adjustment of chamfer grinders
Automatic length detection of worktool (SLEK-system)
Automatic switch on/ switch off of polishing motors
Blades and sheetings made of stainless steel
Grinding direction reigh-left or left-right
Grinding Length: not limited
Work piece thickness: up to 80mm
Seven face grinders
Two chamfer grinders
Belt speed infinitely adjustable 0, 2-4 m/min
Floorspace required: (lxwxh) 3500x1600x1900mm
Weight: approx. 2800 kg
Paintwork: RAL 5015/2004 blue/orange
KOLB KSR Edge Polish Machine
*Call For Pricing
Standard features
Multi-language Control System ( MOELLER)
Operation of machine from swivelling operation box
All polishing motors with solenoid valves (water magnet valves), pressure controllers and switches for each single motor
Machine mounted on a completely hot galvanised base frame
All metal parts made of stainless steel (washers, screws, metal sheets, etc.)
Pneumatically operated lifting frame with rollers in table to move material
Table and lifting frame with rollers are hot galvanised
Stop socket for material lifts and lowers automatically
maintenance panel with water separator and oiler for compressed air
malfunction are shown on display in clear text
Running hour meter
Special tool to change polishing tools quickly from front side
Technical facts:
Polishing length: 3000 mm
Thickness of material: 20 - 60 mm
Face grinders: 5
Width of table: 600 mm
Diameter of tools (face grinders): 130 -150 mm
Diameter of chamfering tools: 130 mm
Operating direction: right --> left
Polishing speed: 0.1 – 0.8 m/min
Return speed: 0.8 m/min
Consumption of pressured air: ca. 30 l/min 8 bar
Water consumption (max.): 80 l/min 4 bar
Height of table: 930 mm
Total weight: 4800 kg
Floorspace required (L x W x H): 8000 x 3000 x 2200 mm
Colour: RAL 5021/7035/3000
Light blue / light grey / red
KOLB Genius Light Processing Centre
*Call For Pricing
Standard features
Multi-language Control System ( MOELLER)
Operation of machine from swivelling operation box
All polishing motors with solenoid valves (water magnet valves), pressure controllers and switches for each single motor
Machine mounted on a completely hot galvanised base frame
All metal parts made of stainless steel (washers, screws, metal sheets, etc.)
Pneumatically operated lifting frame with rollers in table to move material
Table and lifting frame with rollers are hot galvanised
Stop socket for material lifts and lowers automatically
maintenance panel with water separator and oiler for compressed air
malfunction are shown on display in clear text
Running hour meter
Special tool to change polishing tools quickly from front side
Technical facts:
Polishing length: 3000 mm
Thickness of material: 20 - 60 mm
Face grinders: 5
Width of table: 600 mm
Diameter of tools (face grinders): 130 -150 mm
Diameter of chamfering tools: 130 mm
Operating direction: right --> left
Polishing speed: 0.1 – 0.8 m/min
Return speed: 0.8 m/min
Consumption of pressured air: ca. 30 l/min 8 bar
Water consumption (max.): 80 l/min 4 bar
Height of table: 930 mm
Total weight: 4800 kg
Floorspace required (L x W x H): 8000 x 3000 x 2200 mm
Colour: RAL 5021/7035/3000
Light blue / light grey / red
KOLB Genius 3000 Multi Processing Centre
Max. processing surface: 3000 x 1100 mm
( 10 ft x 3,5 ft )
(bigger slabs can be positioned, left side of machine is open)
Max. processing width : NEW: 1100 mm (3,5 ft)
Max. thickness of material: up to 60 mm ( 2,5 inch)
Tool holding fixture: 1/2 inch thread
Max. bore diameter: up to 100 mm ( 4 inch)
Raise and fall of motor: 240 mm (10 inch)
Drive motor: 6 kW (8hp) / 240V /60Hz with
external cooler
(US Standard)
Motor rpm variable: up to 12000 rpm !!
Dimensions of machine: 4,3 x 1,4 x 2,0 m ( 14 x 4,5 x 6,5 ft)
Weight: approx. 1,5 tons
Colour; Blue / light grey RAL 5021/7035
Technical details:
Vertical processing centre build on a sturdy and welded steel pipe construction which is completely hot-galvanised. The support and the bridge runs on maintenance free and adjustable linear saddle guides based on stainless steel rollers. That guarantee an unbelievable smooth and easy movement of the support and the bridge.
To process straight edges both axis can be locked pneumatically by pressing a button.
Production of cut-outs for sinks with a template.
Serial equipment of machine:
Pneumatic locks for longitudinal and cross axis operation by pressing a button
Electronically infinitely adjustable motor up to 12000 rpm
Rise and fall of motor by hand wheel and spindle, precise and quick (or motorised, see options)
2 adjustable stops on the rails on either side of the machine (bridge and support)
Machine operated from clearly arranged and self-explaining operation box
3 removable and adjustable stops to align material
Deposit box for tools made of stainless steel
Detailed instructions for installation, start up and operation on Video and CD-ROM
