Makita Tools

Wet Cutting of Tile, Masonry, Concrete and More

• Powerful 7.9 AMP motor for the most demanding applications
• Special cover design prevents water from entering into motor housing
• Cuts up to 1-5/8" at 90° and 1" at 45°
• Ground fault circuit interrupter (GFCI) plug
• Lock-on button for continuous operation
• Includes 15 ft. of tubing, water pressure regulator and water valve
• Adjustable depth of cut

Compact and Lightweight for Easy Handling

*Fast RPM (11,000) to cut through trim, PVC and plywood

*High power-to-weight ratio

*All-ball and needle bearing construction for longer tool life

*Well balanced and lightweight for easy handling

*Lock-off button helps prevent accidental starts

*Blade-left design improves visibility of cutting line

*Dry cuts of stone and masonry with optional diamond blade

*Includes rip fence for straight cutting of plywood

INCLUDES:

12T Carbide Tipped Blade (A-90093)

Rip Fence (164095-8) Socket Wrench (782209-3)

Spanner Wrench (781011-1)

Blade Diameter

4-3/8"

Arbor 3/4"

Max Cutting Capacity 45° 3/4"

90°  1-1/4"

No Load Speed 11,000 RPM

Watts Out 1,150

AMPS (120V) 9.1

Overall Length 9-1/4"

Net Weight (lbs.) 6.8

Cuts 2x Material at 90°

*Powerful 8.0 AMP motor for fast cutting action *Blade-left design improves visibility of cutting line

*Lightweight (6.2 lbs.) for increased maneuverability

*Electric brake for maximum productivity *Lock-off button helps prevent accidental starts

*Shaft lock for fast blade change *Double insulated

INCLUDES:

18T Carbide Tipped Blade (792335-0) Rip Fence (164095-8) Socket Wrench (782209-3)

Blade Diameter 5-1/2"

Arbor 5/8"

Max Cutting Capacity   90° 1-3/4"

45° 1-3/16"

No Load Speed 8,000 RPM

Watts Out 1,050

AMPS (115V) 8.0

Overall Length 9-13/16"

Net Weight (lbs.) 6.2

*Makita-built motor delivers 260 in.lbs. of torque

*2-speed design (0-400 / 0-1,300 RPM) covers a wide range of drilling and driving applications

*3/8" Keyless chuck for fast and easy bit changes

*16 torque settings plus drill mode for optimum torque control *Ergonomic shape fits like a glove with even pressure and easy control

*Soft grip handle provides increased comfort on the job

INCLUDES:

2 ea. 14.4V Ni-Cd Battery PA14 (194172-2)

Charger (DC1414) 2 ea. Battery Cover (414938-7)

TTool Case (824852-3)

ALSO AVAILABLE:

Capacity 1" Wood

Steel 3/8"

No Load Speed:  Low  0 - 350 RPM

High 0 - 1,200 RPM

Max Torque (in.lbs.) 260

Battery 14.4V

Overall Length 7-9/16"

Net Weight (lbs. w/battery) 3.6

Industrial Metal Gear Housing for Durability

*Powerful 6.0 AMP motor for continuous use *2-speed gear change for ideal speed and power

*Variable speed trigger enables user to match the speed to the application for greater versatility

*Depth gauge for "drop-in" type anchors *All-ball bearing construction for longer tool life

*Adjustable side handle for greater control *Double insulated

INCLUDES:

Drill Chuck (763047-2) Chuck Key (798341-3)

Side Handle (122428-3)

Depth Gauge (321059-7) Tool Case (824608-4)

Capacity:

Concrete

Low: 3/4"

High: 1/2"

Steel

Low: 1/2"

High: 1/4"

Wood

Low: 1-1/2"

High: 3/4"

No Load Speed

Low: 0 - 900 RPM

High: 0 - 2,300 RPM

Blows per Minute

Low: 0 - 18,000 BPM

High: 0 - 46,000 BPM

AMPS (115V) 6.0

Overall Length 13-3/4"

Net Weight (lbs.) 6.4

Powerful 8.5 AMP Motor for Improved Drilling and Mixing Performance

*Powerful 8.5 AMP motor engineered for improved drilling and mixing performance

*600 RPM provides increased speed and torque for drilling large holes

*Well-balanced design at only 6.3 lbs. for reduced operator fatigue

*D-handle rotates 360° with 24 positive stops for multi-position operation

*Rubberized grip for increased operator comfort

*All-ball bearing construction for smooth operation and longer tool life

*Heavy duty industrial 1/2" drill chuck engineered for positive bit retention

*Rocker switch for quick transition between forward and reverse operation

*On-board chuck key storage for fast and convenient bit changes

*Double insulated

INCLUDES:

Drill Chuck (193229-6)

Chuck Key (763420-6) Side Handle (152492-0)

Capacities

No Load Speed

600 RPM

AMPS (120V) 8.5

Overall Length 13-3/8"

Net Weight (lbs.) 6.3

Wood (Auger Bit) 1-7/16"

Wood (Self Feed) 2-9/16"

Wood (Hole Saw) 5"

Steel (Twist Bit)  1/2"

Steel (Hole Saw) 3"

Motor Over Pad Design for Balance and Control

*Powerful 5.2 AMP motor delivers 4,000 RPM for smooth sanding

*Refined design at 6.3 lbs. for reduced operator fatigue

*Ball and needle bearing construction for longer tool life and smooth operation

*Lock-on button for continuous use and added user preference

*Double insulated

INCLUDES:

1 ea. Abrasive Disc #50 (742070-A-5) Rubber Pad (192978-2) Lock Nut (193048-0)

Spanner Wrench (781008-0)

Lock Nut Wrench (782412-6) Side Handle (152492-0)

Sanding Disc  7"

No Load Speed 4,000 RPM

Spindle Thread  5/8" x 11 UNC

AMPS (115V) 5.2

Overall Length 8-7/8"

Net Weight (lbs.) 6.3

Lightweight (4.6 lbs.) for Comfort and Control

*Variable speed control dial (2,500-4,700 RPM) enables user to match the speed to the application

*Electric speed control maintains constant speed under load

*Soft start feature for smooth start-ups

*Refined design at only 4.6 lbs. for reduced operator fatigue

*Trigger lock-on button for operator convenience *Motor over pad design for better balance and control *Externally accessible brushes for greater serviceability

INCLUDES:

1 ea. Sanding Disc #80 (742071-A-5)

Spanner Wrench #17 (781008-0) Lock Nut (193048-0)

Lock Nut Wrench (782412-6) Side Handle (152491-2) Rubber Pad (192978-2)

Sanding Disc 7"

Wool Bonnet 7"

No Load Speed  2,500 - 4,700 RPM

AMPS (120V) 7.9

Spindle Thread  5/8" x 11 UNC

Overall Length  8-1/4"

Net Weight (lbs.) 4.6

Fast and Powerful Polishing for Clearcoat Finishes

*Variable speed control dial enables user to match the speed to the application

*Electronic speed control maintains constant speed under load

*Soft start feature for smooth start-ups *Easily converts to a sander

*3-prong plug to prevent static electricity accumulation

*Fast and powerful polishing for clearcoat finishes

*Lock-on button for continuous use operation *Shown with optional wool bonnet (794366-5)

INCLUDES:

Hook-and-Loop Pad (743052-5)

Hex Wrench (783204-6)

Loop Handle (416256-9) Side Handle (153489-2)

Model 9227CX3 includes a Polishing Kit

Sanding Disc 7"

Wool Bonnet 7"

No Load Speed 0 - 3,000 RPM

AMPS (110V) 10.0

Spindle Thread 5/8" x 11 UNC

Overall Length  18-1/2"

Net Weight (lbs.) 6.8

Precision Engineered for a Professional Finish

*Powerful 7.9 AMP motor with less weight (5.1 lbs.)

*Variable speed control dial enables user to match the speed to the application

*Soft start feature for smooth start-ups *Electronic speed control maintains constant speed under load *Common fitting accepts the most popular water hose connections

*High power-to-weight ratio for reduced operator fatigue *Housing cover protects the industrial die cast aluminum gear housing

*3 holes at the spindle top evenly spread water to the pad and prevents the pad from clogging

*Overload switch to protect armature failure *Includes a ground fault circuit interrupter (GFCI) plug

INCLUDES:

Head Cover (417322-5) Wrench (781008-0) Rubber Pad (743079-5)

Side Handle (153489-2) Front Grip (418507-6) Hex Wrench (783204-6)

Dust Cover (194233-8)

Polishing Disc 4"

No Load Speed 2,000 - 4,000 RPM

AMPS (120V) 7.9

Spindle Thread 5/8" x 11 UNC

Overall Length 14-1/8"

Net Weight (lbs.) 5.1

Extra Large Paddle Switch for Comfortable Operation

*Powerful 7.5 AMP motor for high output power in a more compact tool (only 4.5 lbs.)

*Small diameter barrel grip (only 2-1/2") for added comfort

*Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life

*Lock-on/off feature for continuous operation

*AC/DC switch for use with alternative power source

*Protective zig-zig varnish seals the armature from dust and debris for longer tool life

*Extra large paddle switch for comfortable operation

*Thicker coil wires are wound more closely to reduce heat and energy loss

*All-ball bearing design and metal gear housing for durability

*Rotatable gear housing can be positioned every 90°

INCLUDES:

4-1/2" Grinding Wheel (741424-8-1)

WWheel Guard (125273-5) Lock Nut (193465-4)

Lock Nut Wrench (782422-3) Side Handle (153489-2) Inner Flange (224399-1)

Grinding Wheel  4-1/2"

Wire Cup Brush  3-1/2"

Sanding Disc  4-1/2"

No Load Speed  10,000 RPM

AMPS (120V) 7.5

Spindle Thread  5/8" x 11 UNC

Lock-On: Yes

Lock-Off: Yes

Overall Length 10-3/4"

Net Weight (lbs.) 4.5

Refined Design at Only 4.0 lbs., Powerful 6.0 AMP

*Powerful 6.0 AMP motor delivers 11,000 RPM for the most demanding applications

*Small diameter barrel grip (only 2-1/4") for added comfort

*Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life

*Refined design at only 4.0 lbs for reduced operator fatigue

*Externally accessible brushes for greater serviceability

*Protective zig-zag varnish seals the armature from dust and debris for longer tool life

*All-ball bearing design and metal gear housing for added durability

*Machined bevel gears provide up to 2x longer service life than previous models

*Side handle is positioned at an increased 20° angle for added comfort and control

*Ideal for welders, fabricators, masons, maintenance/repair and more

INCLUDES:

4-1/2" Grinding Wheel (741423-B)

Wheel Guard (122886-3) Lock Nut (194608-1)

Lock Nut Wrench (782420-7) Side Handle (153504-2) Inner Flange (224377-1)

Grinding Wheel  4-1/2"

Wire Cup Brush  3-1/2"

Sanding Disc  4-1/2"

No Load Speed  11,000 RPM

Spindle Thread  5/8" x 11 UNC

AMPS (120V) 6.0

Dimensions (LxWxH) 10-1/2" x 5" x 4-1/16"

Net Weight (lbs.) 4.0

Super Joint System (SJS) helps prevent gear damage

*Labyrinth construction seals the motor and bearings from dust and debris by creating a complex set of channels prohibiting motor contamination

*Powerful 12.5 AMP motor delivers 10,000 RPM for maximum productivity

*Electric brake stops the grinding wheel 50% faster than competitive angle grinders

*Grinder head rotates 90° left or right for operator convenience

*AC/DC switch for use with alternative power sources

*Protective zig-zag varnish and tape seal the motor armature and field from dust and debris

*All dust proof ball bearing construction for a long tool life

*Large trigger for comfortable long term operation

*Large spindle lock button for easy accessory changes

*Spiral gears for efficient power transmission

*Externally accessible carbon brushes for fast and easy replacement

*Double insulated

INCLUDES:

5" Grinding Wheel (741407-8)

Lock Nut Wrench (782412-6) Lock Nut (224566-8)

Inner Flange (224368-2)

Wheel Guard Assembly (125097-9) Side Handle (152492-0)

Grinding Wheel 5"

Wire Cup Brush 3-1/2"

Sanding Disc 5"

No Load RPM 10,000

AMPS 12.5

Spindle Thread  5/8" x 11 UNC

Length  15-1/8"

Net Weight (lbs.) 5.5

SJS - Super Joint System Helps Prevent Gear Damage

*Super Joint System (SJS) technology helps prevent gear damage caused by accidental wheel binding

*Variable speed control dial enables user to match the speed to the application

*Powerful 12.0 AMP motor for increased output power in a more compact tool (5.3 lbs.)

*Soft start feature for smooth start-ups

*Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life

*Electronic speed control maintains constant speed under load

*Larger and improved carbon brush material for longer tool life

*"Tool-less" wheel guard adjustment for easy clamping

INCLUDES:

4-1/2" Grinding Wheel (741407-8-1) Lock Nut Wrench (782412-6) Side Handle (153489-2) Lock Nut (193465-4)

Inner Flange (224399-1)

Wheel Guard (135107-4)

Grinding Wheel 4-1/2"

Wire Cup Brush 3-1/2"

Sanding Disc 4-1/2"

No Load Speed 2,800 - 10,500 RPM

AMPS (120V) 12.0

Vibration (m/s2) 5.0

Spindle Thread 5/8" x 11 UNC

Dimensions (LxWxH) 11-3/4" x 5-1/16" x 4"

Net Weight (lbs.) 5.3

Super Joint System (SJS) Helps Prevent Gear Damage

*Super Joint System (SJS) technology helps prevent gear damage caused by accidental wheel binding

*Variable speed control dial enables user to match the speed to the application

*Powerful 12.0 AMP motor for increased output power in a more compact tool (5.2 lbs.)

*Soft start feature for smooth start-ups

*Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life

*Electronic speed control maintains constant speed under load

*Larger and improved carbon brush material for longer tool life

*"Tool-less" wheel guard adjustment for easy clamping

INCLUDES:

5" Grinding Wheel (741407-8-1) Lock Nut Wrench (782412-6) Side Handle (153489-2) Lock Nut (193465-4)

Inner Flange (224378-9)

Wheel Guard (135108-2) Grinding Wheel 5"

Wire Cup Brush 3-1/2"

Sanding Disc 5"

No Load Speed 2,800 - 10,500 RPM

AMPS (120V) 12.0

Vibration (m/s2) 5.0

Spindle Thread 5/8" x 11 UNC

Dimensions (LxWxH) 11-3/4" x 5-1/2" x 4"

Net Weight (lbs.) 5.2

Rugged Metal Housing for Long Tool Life

*Extra heavy duty 15.0 AMP motor for high production; lock-on feature for continuous operation

*6,000 RPM for fast material removal *Rugged metal housing for longer tool life *All-ball and needle bearing construction for longer tool life

*Accepts 7" or 9" wheel with correct guards *Side handle can be installed on either side of the tool *AC/DC switch for use with alternative power source *Spindle lock for easy wheel changes *Standard 5/8" x 11 UNC spindle thread for various accessories

INCLUDES:

Side Handle (152492-0) Spindle Washer (261039-0)

Grinding Wheel 7" or 9"

Wire Cup Brush 6"

Sanding Disc 7"

No Load Speed 6,000 RPM

AMPS (115V) 15.0

Spindle Thread 5/8" x 11 UNC

Overall Length 16-1/4"

Net Weight (lbs.) 12.2

*Powerful motor with fast 25,000 RPM

*Easy-to-handle at only 3.7 lbs.' *Protective zig-zag varnish seals the armature from dust and debris for longer tool life

*Solid aluminum housing with stepped neck for added durability *Vent slots designed to direct exhaust air away from the user

*Round-shaped collet nut reduces the possibility of damage

*AC/DC switch for use with alternative power source *Easy-to-operate slide switch *High heat resistance

INCLUDES:

1/4" Collet Cone (763625-8) 2 ea. Wrench (781039-9)

Collet Size 1/4"

No Load Speed 25,000 RPM

Max Wheel Diameter 1-1/2"

AMPS (120V) 3.5

Overall Length 14-1/8"

Net Weight (lbs.) 3.7

*Built-in shock-proof, high output, white L.E.D. light illuminates cutting edge and increases visibility with a bulb that never needs replacing throughout the life of the tool

2 ea. Blade set (B10, B13, B22)

**Powerful 6.3 amp motor and lightweight (5.3 lbs.)

Anti-splintering device (192557-6)

**Variable speed (800 - 2,800 SPM) for controlled cutting

Cover plate (417852-6)

**"Tool-less" push-in lock system for extremely fast blade installation and removal

Plastic case (182807-7)

**40% less vibration with lowest noise level than the leading competitor

*Cuts 48% faster than the leading competitor

SPECIFICATIONS

**Electronic speed control dial and soft start feature for maximum performance

*4-Position cut settings (3 orbital, 1 straight) for fast and efficient cutting in all applications

Length of Stroke: 1"

**Accepts Tang shank blades

Max. Cut Capacity: Wood at 90° 5-5/16"

Max. Cut Capacity: Steel at 90° 3/8"

No Load Speed: (RPM) 800 - 2,800

Amps: 6.3

Length: 9-1/4"

Weight: (lbs.) 5.3 lbs.

Anti-Vibration Technology for 2X Less Vibration

Powerful 15.0 AMP motor with 0-2,800 SPM

Electronic speed control maintains constant speed under load

Built-in clutch reduces gear damage by disengaging gears if blade binds

4-position orbital/straight cutting action

Variable speed control dial enables user to match the speed to the application

Long 1-1/4" stroke for faster cutting "Tool-less" blade change and shoe adjustment

Ergonomically designed rubberized grip for more comfort

Anti-vibration technology for 2x less vibration

INCLUDES:

1 ea. Blade (723054-A, 723066-A) Metal Tool Case

Length of Stroke 1-1/4"

Strokes per Minute 0 - 2,800 SPM

AMPS (120V) 15.0

Overall Length 19-1/8"

Net Weight (lbs.) 10

Lightweight (5.5 lbs.) for Easy Handling

*Hi-speed motor for powerful and smooth cuts

*Lightweight (5.5 lbs.) for easy handling *Contoured double handles for comfort and control

*Large calibrated depth control ring

*Shaft lock for quick changing of bits with just one wrench

*All-ball bearing construction for longer tool life

*3-1/2" diameter detachable motor for use on commercial router bases

INCLUDES:

1/4" Collet (763608-8) Wrench (781008-0)

CCollet Capacity 1/4"

No Load Speed 30,000 RPM

AMPS (115V) 7.0

Max Horsepower* 1

Overall Height 7-1/8"

Net Weight (lbs.) 5.5

FEATURES

224,000 rpm for fast, clean routing

Contoured handle design with built in switch for better

3 turret depth stop for quick repetitive depth adjustme

Rugged polycarbonate housing with a nonmarring bas

Uses commonly available 1/4" shank router bits

Comes complete with a plastic tool case for convenie

Double insulated

Includes:

1/4" Collet cone (763637-1)

Wrench (#8; 781213-9, #13; 781006-4, #22; 781011-1)

Plastic tool case (824283-6)

SPECIFICATIONS

Collet capacities: 1/4"

No load speed: 24,000 rpm

Amps: 7.8 (115V)

Maximum horsepower: 1.25

Overall height: 8-5/16"

Net weight: 5.3 lbs.

Versatile Tool for Scraping and Tile Removal

*Powerful 4.5 AMP motor with 0-3,200 BPM for the most demanding applications

*Air cushion hammering for longer tool life *Quick change bit retainer for easy changes

*Automatic brush cut-off protects commutator from damage for longer tool life

*All-ball bearing construction for longer tool life *Factory grease packed for reduced maintenance *Double insulated *Accepts Makita Small bits

INCLUDES:

1-3/16" Scaling Chisel (B-07331)

2" Scaling Chisel (B-07347)

Bull Point (B-06921) Dust Cover (423154-0) Tool Case (150640-5)

Blows per Minute 0 - 3,200 BPM

Impact Energy  3.9 Joules 2.9 ft.lbs.

AMPS (115V) 4.5

Vibration (m/s2) 8

Bit Type: Makita Small Bits

Overall Length 12-3/8"

Net Weight (lbs.) 7.1

Air Cushion Design for Powerful Performance

*Powerful 10.0 AMP motor delivers 2,000 BPM for the most demanding applications

*Comfortable rubber D-shaped grip side handle absorbs vibration; secures in four positions for operator convenience in any position

*One-touch latch bit retainer for quick bit changes *AC/DC switch for use with alternative power source

*Makita Motor Advantage includes field core interlocking steel laminations, dual ball bearing armature, and large surface commutator, resulting in the most efficient transfer of energy for more power and longer tool life

*Automatic brush cut-off protects commutator from damage for longer tool life

*Factory grease packed for reduced maintenance *Accepts 3/4" Hex Shank bits

INCLUDES:

Hex Wrench #4 (783202-0) Hex Wrench #8

Tool Case Blows per Minute 2,000 BPM

Impact Energy 10.5 ft.lbs. 14.2 Joules

AMPS (115V) 10.0

Bit Type 3/4" Hex Shank Bits

Overall Length 19-5/16"

Net Weight (lbs.) 20.7