Thinset and Cement

VERSABOND THIN SET white 50 lbs

*For Pickup Only

Product Description
VersaBond Flex Fortified Thin-Set Mortar is a professional formula, all-purpose mortar with high flexibility and bond strength. With outstanding adhesion to plywood subfloors, this mortar is also ideal for porcelain and glass tile installations. Use it for interior or exterior floors, countertops and walls. VersaBond Flex Thin-Set Mortar can be used with the following tile types:
• Vitreous, semi-vitreous or non-vitreous tile: ceramic, mosaic, quarry, cement body tile
• Impervious porcelain and glass tile
• Brick and thin brick
• Cement-based precast terrazzo
• Natural stone tile VersaBond Flex Thin-Set Mortar can be used with the following substrates:
• Concrete, mortar beds, masonry, Portland cement plaster
• WonderBoard®, cement backerboards
• Exterior grade plywood (interior residential and light commercial dry areas)
• Gypsum wallboard (interior dry areas)
• Liquid applied waterproofing membranes such as RedGard® and Custom 9240®
• Crack prevention sheet membranes such as Crack Buster Pro®
• Existing ceramic tile
• Fully bonded sheet vinyl flooring
• Plastic laminates
• Properly prepared cutback adhesive

COMPOSITION & MATERIALS

VersaBond Flex Thin-Set Mortar is a dry, proprietary Portland cement based mixture that includes vinyl copolymers, inorganic aggregates and chemicals

BENEFITS

• High bond strength and flexibility
• Excellent adhesion to plywood subfloors
• Excellent for porcelain and glass tile installations
• Excellent handling characteristics through extended open and adjustment times
• Exceeds ANSI A118.4 and A118.11 standards without the need for additives

Megaflex THIN SET white 50 lbs.

*For Pickup Only

Product Description
MegaFlex Crack Prevention Mortar is the ultimate in flexibility and bond strength for the most demanding installation requirements. Its unique blend of polymers and inorganic chemicals enhance the bond between the tile and substrate for unsurpassed performance as part of a wide variety of new and existing job conditions. Flexible enough to withstand horizontal substrate movement to 1/8" (3 mm). MegaFlex offers up to 20% more coverage than other thin-sets and exceeds ANSI A118.4 and A118.11 standards without the need for additives. Use it for interior or exterior floors, countertops and walls. MegaFlex can be used with the following tile types:
• Vitreous, semi-vitreous or non-vitreous tile: ceramic, mosaic, quarry, cement body tile
• Impervious porcelain and glass tile
• Brick and thin brick
• Cement-based precast terrazzo
• Natural stone tile

MegaFlex can be used with the following substrates:

• Concrete, mortar beds, masonry, Portland cement plaster
• WonderBoard®, cement backerboards
• Liquid applied waterproofing membranes such as RedGard® and Custom 9240®
• Crack prevention sheet membranes such as Crack Buster Pro®
• Exterior grade plywood (interior residential and light commercial dry areas)
• Gypsum wallboard (interior dry areas)
• Existing ceramic tile
• Fully bonded sheet vinyl flooring
• Plastic laminates
• Cutback adhesive (see preparation instructions)

BENEFITS

• Maximum bond strength and flexibility
• Superior bonding to plywood and to porcelain tile
• Isolates cracks to 1/8" (3 mm)
• Excellent handling characteristics through extended open and adjustment times
• Provides up to 20% more coverage than typical Portland cement mortars
• Exceeds ANSI A118.4 and A118.11 standards without the need for additives

Speed Set Thin Set  white 50 lbs.

*For Pick Up Only

Product Description

SpeedSet Fortified Thin-Set Mortar is a quick setting, polymer-modified mortar, excellent for commercial use and cold temperature installations, as well as small residential jobs and repairs. Quick curing properties allow grouting in as little as 2 hours and light traffic in 6 hours. SpeedSet Fortified Mortar can be used with the following tile types:

• Vitreous, semi-vitreous and absorptive tile, including ceramic, mosaic, quarry, cement body tile
• Impervious glass and porcelain tile
• Natural stone
• Cement-based precast terrazzo
• Brick
• Thin brick

Uses for SpeedSet include:
• Interior and exterior floors, countertops, walls
• Concrete, mortar beds, masonry, Portland cement plaster
• WonderBoard®, cement backerboards
• Exterior grade plywood for interior residential and light commercial dry areas
• Gypsum wallboard (dry areas)
• Water-resistant wallboard
• Existing ceramic tile
• Well bonded, fully glued sheet vinyl flooring
• Plastic laminates
• Cutback adhesive

COMPOSITION & MATERIALS

SpeedSet Fortified Thin-Set Mortar is a dry, proprietary blend of Portland cement, copolymers, inorganic aggregates and chemicals

SIZES, COLORS
• 25 lb (11.34 kg) bag
• White

BENEFITS
• Quick setting mortar for time-critical installations
• Allows grouting in 2 hours and traffic in 6 hours
• Can be used for repair and small jobs
• Exceeds ANSI A118.4 and A118.11 standards without the need for additives

VERSABOND THIN SET gray 50 lbs

*For Pickup Only

Product Description

VersaBond Flex Fortified Thin-Set Mortar is a professional formula, all-purpose mortar with high flexibility and bond strength. With outstanding adhesion to plywood subfloors, this mortar is also ideal for porcelain and glass tile installations. Use it for interior or exterior floors, countertops and walls.
VersaBond Flex Thin-Set Mortar can be used with the following tile types:
• Vitreous, semi-vitreous or non-vitreous tile: ceramic, mosaic, quarry, cement body tile
• Impervious porcelain and glass tile
• Brick and thin brick
• Cement-based precast terrazzo
• Natural stone tile VersaBond Flex Thin-Set Mortar can be used with the following substrates:
• Concrete, mortar beds, masonry, Portland cement plaster
• WonderBoard®, cement backerboards
• Exterior grade plywood (interior residential and light commercial dry areas)
• Gypsum wallboard (interior dry areas)
• Liquid applied waterproofing membranes such as RedGard® and Custom 9240®
• Crack prevention sheet membranes such as Crack Buster Pro®
• Existing ceramic tile
• Fully bonded sheet vinyl flooring
• Plastic laminates
• Properly prepared cutback adhesive

COMPOSITION & MATERIALS
VersaBond Flex Thin-Set Mortar is a dry, proprietary
Portland cement based mixture that includes vinyl copolymers, inorganic aggregates and chemicals

BENEFITS

• High bond strength and flexibility
• Excellent adhesion to plywood subfloors
• Excellent for porcelain and glass tile installations
• Excellent handling characteristics through extended open and adjustment times
• Exceeds ANSI A118.4 and A118.11 standards without the need for additives

911 C cure Thin set 50 lbs.

*For Pick Up Only

PRODUCT DESCRIPTION
THINSET 911 is a factory blend of Portland cement, sand and a unique blend of special additives. C-Cure THINSET 911 produces an excellent bond with greater coverage than conventional dry-set mortars for the installation of ceramic tile.

BASIC USE

THINSET 911 is used as a bond coat for setting absorptive, semi-vitreous and vitreous ceramic tile for service in residential and commercial use for both floor and wall installations. It is used in a mortar bed from 3/32" to 3/16" (2.4 to 5 mm) after the tiles have been properly embedded. THINSET 911 has excellent water and impact resistance, is water cleanable, non-flammable, good for exterior work and requires no soaking of tiles. THINSET 911 mortar is not affected by prolonged contact with water, but does not form a waterproof barrier. THINSET 911 provides a permanent installation withhigher bond strength, however, requires lower material and labor costs than conventional Portland cement mortar beds.

AREAS OF USE Suitable backings, when properly prepared, include plumb and true masonry, concrete, gypsum board (dry interior walls only), cementitious backer units, cured Portland cement mortar beds, brick, ceramic tile and marble.

LIMITATIONS

THINSET 911 must not be applied directly over wood, asphalt sheeting, vinyl covered wall board, Masonite®, cement asbestos board, metal, glass, plastic or gypsum mortar beds. Apply in temperature range of 40°F to 90°F (4°C to 32°C). Do not allow mortar to freeze for the first 72 hours. Some green or red marbles may warp when installed with setting materials containing water, causing loss of bond and/or damage to the finish. These marbles must be set with COLORSET EPOXY 931.

917 C cure Thin set 50 lbs

*For Pick Up Only


PRODUCT DESCRIPTION
MULTISET 917 is the economical polymermodified dry-set mortar designed for the bonding of all types of tiles. It may be used for either walls or floors for both interior and exterior applications where a liquid latexmodified mortar is recommended. MULTISET 917 is a blend of Portland cement, sand and special dry latex additives that significantly improve bond strength and freeze-thaw stability — performance characteristics typically available only through the addition of liquid latex additives to dry-set mortar.

BASIC USE
MULTISET 917 is used as a bond coat for setting high lug, absorptive, semi-vitreous and vitreous ceramic tiles for service in residential and commercial use. It is used in a mortar bed from 3/32" to 3/16" (2.4 to 4.8 mm) after the tiles have been properly embedded. MULTISET 917 has excellent water and impact resistance, is water cleanable, non-flammable, good for exterior work and requires no soaking of tiles. MULTISET 917 mortar is not affected by prolonged contact with water, but does not form a waterproof barrier. MULTISET 917 provides a permanent installation with higher bond strength and lower material and labor costs than conventional Portland cement mortar beds.

AREAS OF USE
Suitable backings, when properly prepared, include plumb and true masonry, concrete,cementitious backer units, cured Portland cement mortar beds, brick, ceramic tile and marble. For interior dry areas only, it may be used over gypsum board (on vertical surfaces only).

Multi ProThin Set  white 50 lbs.

Multi-Pro is an economical polymer modified thin-set mortar with good bond strength for tile installations over most surfaces.

*For Pick Up Only

Thin set pro white 50 lbs.

Thinset-Pro is a blend of premium ingredients and additives for the professional tile setter. Factory blended to produce a creamy, easy to spread strong mortar for tile setting.

*For Pick Up Only

Specmix 94 lbs.

*For Pick Up Only

Spec Mix Masonry Mortar is a dry, factory blended mortar specifically designed for use by masonry contractors. This product is produced under strict quality control guidelines in accordance with A.S.T.M. and U.B.C. standards. Masonry Mortar provides a superior product to job site mixing due to control of mix ratio and quality of sand. It is available in several packaging options to provide savings in handling and mixing. Masonry Mortar is available in the following standard mix designs as well as special orders for individual job requirements

Portland cement 94 lbs.

Type II/V Cement

*For Pick Up Only

Dry Pack 94 lbs.

Dry Pack is a dry, factory blended mortar specifically designed for use by tile and masonry contractors. The product is a thoroughly blended mix of washed plaster sand and Type II cement. Pre-blending allows the cement to thoroughly coat the sand particles thus producing a stronger than jobsite mixing. The mortar is mixed extremely dry and then screed into place as a leveling mortar bed. The mortar bed is compatible with cement based and most water based latex adhesives. Standard mix designs are 4:1 and 3:1. Special mix designs available.

*For Pick Up Only

Polyblend® Sanded Grout

A polymer-modified grout that produces hard, dense joints that are resistant to shrinking, cracking and wear. Formulated with proprietary technology to ensure durability, color consistency and quick setting. Choose from 48 impressive colors. Use sanded grout for joints from 1/8” to 1/2” (3 to 13 mm).

Tile Types

Vitreous, semi-vitreous or absorptive tile: ceramic, mosaic, quarry, cement. Impervious porcelain and glass tile, brick and mini-brick, precast terrazzo, natural stone tile

Polyblend® Non-Sanded Grout
Non-Sanded Grout 10 lbs

A polymer-modified grout that produces hard, dense joints that are resistant to shrinking, cracking and wear. Formulated with proprietary technology to ensure durability, color consistency and quick setting. Choose from 48 impressive colors. Use non-sanded grout for joints up to 1/8” (3 mm).

Tile Types
Vitreous, semi-vitreous or absorptive tile: ceramic, mosaic, quarry, cement. Impervious porcelain and glass tile, brick and mini-brick, precast terrazzo, natural stone tile.